aidapt Quiet Knight Mattress Raiser Fitting And Maintenance Instructions page 5

5. How to fit the mattress strap:
Take the small strap and loop around the chrome extender side pieces.
Repeat the action on the opposite chrome extender. Place the mattress back onto the
top section of the elevator. Pass the strap over the mattress and secure into the small
strap, tighten and knot for additional safety.
Now remove the transit strap (plastic cable ties) to the rear of the Quiet Knight. Be sure
to wear protective eye wear when removing the transit strap.
WARNING! Make sure that you DO NOT extend the mattress support extender beyond
the sides of the mattress, as this will reduce the cover of support.
DETAILED GUIDE TO FITTING STRAPS AND BUCKLES
If you require further instruction to fit the straps and buckles, the illustrations below have been
provided to show this in greater detail.
1. The sequence below illustrates how to attach the short strap to the variator frame:
Usage and Maintenance Instructions
Fig 1a.
5
Fig 1b.
Ver. 2 07/2012 (1005)