Yamaha KODIAK 700 2022 Owner's Manual page 118

2 1
1. Final gear oil filler bolt
2. Gasket
4. Check the gaskets for damage, and replace
them if necessary.
5. Install the oil level check bolt, the oil filler bolt
and their gasket, and then tighten the bolts to
9
the specified torques.
Tightening torques:
Final gear oil level check bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
To change the final gear oil
1. Park the ATV on a level surface.
2. Place an oil pan under the final gear case to
collect the used oil.
3. Remove the final gear oil filler bolt, the final
gear oil level check bolt, the final gear oil drain
bolt and their gasket to drain the oil from the
final gear case.
2
1
1. Final gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
9-25