Table of Contents
Advertisement
3.
Toggle to the left or right to adjust the sliding scales.
4.
Input: Select the source from HDMI1 ,HDMI2,DP.
5.
Auto Source: Automatically searches for available input sources.
6.
DP Format: Select the source from DP 1.1,DP1.2，DP1.4
7.
Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect.
8.
PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and PBP. You
can also adjust the PIP Position, Sub Source, Source Swap, and Audio Source.
9.
Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive,VRB) and shortcut keys 2 (Modes,
Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,VRB)
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
11. HDMI Black Level: You can select the level of blackness under HDMI source.The options
are Normal and Low.
12. Quick start mode: Select Off or On. Turn on to speed up boot speed.
Information
Reset All Settings: Reset all settings to the defaults.
Save Setting to...(User mode only)
1.
Press the MENU key to open the OSD.
14
Advertisement
Table of Contents
