Table of Contents
Advertisement
6.
VRB: Select Off, Normal, or Extreme.
1. If FreeSync is "ON",then the VRB selection is set to "Normal"automatically.
2. If FreeSync is "OFF",then the user can set VRB to either one of the three settings
including: (a) Extreme (b) Normal (c) Off.
7.
Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.
8.
Aim point: Show an Aim point on the screen for shooting games.
-------------------------------------------------------------------------------------------------------
Note: Aim Point is not supported in PBP mode.
Adjusting the OSD
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or don to select OSD from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Language: Set the OSD menu language.
5.
OSD timeout: Adjust the delay before turning off the OSD menu.
6.
Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7.
OSD Lock: OSD Lock function after the start of all Key unavailable.
Adjusting the System
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
13
Advertisement
Table of Contents
