Advertisement

Acer LCD Monitor
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Acer Vero V7 V247Y E

  • Page 1 Acer LCD Monitor User Guide...
  • Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 3: Information For Your Safety And Comfort

    Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •...
  • Page 4: Safe Listening

    Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions.
  • Page 5: Product Servicing

    • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
  • Page 6: Potentially Explosive Environments

    We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products.
  • Page 7: Lcd Pixel Statement

    Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/ sustainability01.htm LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques.
  • Page 8: Taking Care Of Your Vision

    Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •...
  • Page 9: Declaration Of Conformity

    (“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized...
  • Page 10 A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories.
  • Page 11 ENERGY STAR® Acer’s ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR?
  • Page 12: Federal Communications Commission Declaration Of Conformity

    Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
  • Page 13 Information for your safety and comfort Safety instructions Special notes on LCD monitors Cleaning your monitors Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions LCD pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision...
  • Page 14 Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. VGA Cable LCD monitor Quick start guide (Optional) LCD Monitor V7 series/V247Y USER GUIDE DP Cable...
  • Page 15: Attaching The Base

    • Attaching the Base Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. • Screen position adjustment To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor as shown below.
  • Page 16: Connecting The Adapter And Ac Power Cord

    Connecting the adapter and AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area.
  • Page 17: Display Data Channel (Ddc)

    Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing.
  • Page 18 19‑pin color display signal cable PIN No. Description PIN No. Description TMDS Data2+ TMDS Data2 Shield TMDS Data2- TMDS Data1+ TMDS Data1 Shield TMDS Data1- TMDS Data0+ TMDS Data0 Shield TMDS Data0- TMDS Clock+ TMDS Clock Shield TMDS Clock- Reserved (N.C. on device) DDC/CEC Ground +5V Power Hot Plug Detect...
  • Page 19: Standard Timing Table

    Standard timing table VESA MODE MODE Resolution 640x480 60Hz 640x480 66.66Hz VESA 720x400 70Hz SVGA 800x600 56Hz SVGA 800x600 60Hz 1024x768 60Hz 1024x768 70Hz VESA 1152x864 75Hz SXGA 1280x1024 60Hz 1280x720 60Hz VESA 1280x800 60Hz WXGA 1440x900 60Hz WXGA+ 1680x1050 60Hz WSXGA+ 1920x1080...
  • Page 20: Installation

    Installation Turn off your computer and unplug your computer's power cord. Connect the signal cable to the VGA and /or HDMI1.4 (optional) and /or DP (optional) input socket of the monitor, and the VGA and /or HDMI1.4 (optional) and /or DP (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
  • Page 21: User Controls

    User Controls External controls Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode. Function key Press to view Main page. Press again to enter hotkey1 function. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.
  • Page 22: Using The Shortcut Menu

    Using the Shortcut Menu ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings.
  • Page 23: Selecting The Input

    Selecting the input Open the Input control and select VGA IN, HDMI1.4, DP or Auto Source. When you are done, press the joystick to exit current page and store. Input Input HDMI Auto Source Move Exit Main menu 1. Press the MENU key to open the OSD. 2.
  • Page 24 Brightness: Adjust the brightness from 0 to 100. ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ Note: Adjusts the balance between light and dark shades. Contrast: Adjust the contrast from 0 to 100. ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ Note: Sets the degree of difference between light and dark areas. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades.
  • Page 25 Modes:To choose scenario mode. sRGB: Default is off. You can turn sRGB on or off to better color match with peripheral devices, such as printers and digital cameras. Grayscale Mode:To choose Grayscale mode. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue. 10.
  • Page 26 Refresh rate num: Display the panel’s current refresh rate on the screen. Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD. Mode - Standard Picture Language English Color OSD Timeout Audio Transparency Off OSD Lock Performance Off...
  • Page 27 System Mode - Standard Picture HDMI1 Input Color Auto Source DP1.2 DP Format Audio Performance Wide Mode Full PIP/PBP Hot Key Assignment System DDC/CI HDMI Black Level Normal Move Enter Quick Start Mode Mode - Standard Picture Off Quick Start Mode Press the MENU key to open the OSD.
  • Page 28: Save Setting To...(User Mode Only)

    Save Setting to…(User mode only) Mode - User Picture Mode: Standard Color Mode: ECO Audio Mode: Graphic Performance Mode: Movie Mode: User System Save setting to... Move Enter Press the MENU key to open the OSD. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
  • Page 29: Troubleshooting

    Check if the computer system is switched on and in power saving/standby mode. If OSD Lock is On, the LED status set Amber. Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.
  • Page 30 Product Information for EU Energy Regulatory Compliance 217186 I.T.E.
  • Page 31 English The default OSD mode of this monitor is ECO mode. If you wish to adjust Brightness/Contrast of your monitor,please change OSD mode to Standard mode in the Picture menu. Then you can manually adjust Brightness/Contrast level. TCO certifies the Standard mode.
  • Page 32 Español El modo OSD predeterminado de este monitor es ECO. Si desea ajustar el brillo o el contraste del monitor, cambie el modo OSD a Estándar en el menú Imagen. A continuación, puede ajustar manualmente el nivel de brillo y contraste. TCO certifica el modo Estándar.
  • Page 33 Esant numatytajai OSD režimo nuostatai, šis monitorius veikia ECO (Taupymo) Lietuviu režimu. Jei norite sureguliuoti monitoriaus „Brightness“ (Šviesumo) / „Contrast“ (Kontrasto) nuostatas, pakeiskite OSD režimą, „Picture“ (Vaizdo) meniu pasirinkdami „Standard“ (Standartinį) režimą. Tuomet galėsite patys nustatyti „Brightness“ (Šviesumo) / „Contrast“ (Kontrasto) lygį. TCO sertifikuotas režimas yra „Standard“...
  • Page 34 Slovenščina Privzeti način zaslonskega vmesnika tega monitorja je način ECO. Če želite prilagoditi svetlost/kontrast monitorja,spremenite način zaslonskega vmesnika v standardni način v meniju »Picture« (Slika). Nato lahko ročno prilagodite raven svetlosti/kontrasta. Potrdilo za standardni način je izdal TCO. Podrazumevani režim prikaza na ekranu ovog monitora je režim ECO. Ako želite Srpski da podesite osvetljenost/kontrast monitora, promenite režim prikaza na ekranu na Standard (Standardni) u meniju Picture (Slika).

This manual is also suitable for:

Um.qv7aa.e01

Table of Contents