Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Acer EI322QK
Summary of Contents for Acer EI322QK
- Page 1 Acer LCD Monitor User Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: _________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
-
Page 3: Special Notes On Lcd Monitors
Information for Your Safety and Comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •... -
Page 4: Warnings
Warnings • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. • Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. -
Page 5: Potentially Explosive Environments
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. -
Page 6: Lcd Pixel Statement
LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: •... -
Page 7: Developing Good Work Habits
Display • Keep your display clean. • Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display. • Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity. - Page 8 EI322QK A xxxxxxxx (“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied: ⊠...
- Page 9 The following local Manufacturer / Importer is responsible for this declaration: Product: LCD Monitor Model Number: EI322QK A SKU Number: EI322QK A xxxxxxxx (“x” = 0~9, a ~ z, A ~ Z, or blank) Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St.,...
-
Page 10: Table Of Contents
Information for Your Safety and Comfort Safety instructions Special notes on LCD monitors Cleaning your monitor Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions LCD pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision... - Page 11 Main Menu The Function page TROUBLESHOOTING HDMI/DP Mode (Optional)
-
Page 12: Package Contents
LCD Monitor AC Power Cord DP Cable (Optional) HDMI Cable (Optional) Quick Start Guide VESA Mount Screws HDMI LCD Monitor EI2 series-EI322QK A (1) M4*35 mm Hex standoffs USER GUIDE... -
Page 13: Attaching The Monitor To The Base
Attaching the monitor to the base 1. Unpack the box. Take out the 2. Take the LCD monitor out of the box Styrofoam side by side and set flat carefully and put it on the side by on the desktop. side Styrofoam. -
Page 14: Attaching The Monitor On The Wall
Attaching the monitor on the wall Original Screws x 4 Use the 35 mm NO.2 Screws x 4 1. Remove the original screws x 4 Fig. 2. Tighten the 4 pcs NO.2 screws as Fig . from the opening back of the monitor. Mount (Not included) 3. -
Page 15: Screen Position Adjustment
SCREEN POSITION ADJUSTMENT To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down. Tilt Height Adjustment Swivel... -
Page 16: Connecting The Power Cord
CONNECTING THE POWER CORD • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Connecting the adapter and AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. -
Page 17: Display Data Channel (Ddc)
Display Data Channel (DDC) To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. -
Page 18: 19-Pin Color Display Signal Cable
19-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA2- DATA2+ DATA1- DATA1+ DATA0- DATA0+ DCLK- DCLK+ HDMI_SCL HDMI_SDA HDMI_DET HDMI15V HDMI_HPD... -
Page 19: Standard Timing Table
STANDARD TIMING TABLE Mode Resolution 640 x 480 60 Hz 640 x 480 72 Hz 640 x 480 75 Hz 640 x 480 66.66 Hz VESA 720 x 400 70 Hz 800 x 600 56 Hz 800 x 600 60 Hz SVGA 800 x 600 72 Hz... -
Page 20: Connecting Your Monitor To A Computer
Connecting Your Monitor to a Computer 1. Make sure both the monitor and computer are powered-OFF. 2. Connect DP Cable (Only DP-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DP cable to the computer. 3. -
Page 21: External Controls
External Controls Icon Item Description a. Press to trigger Mode control. Input button / b. When the OSD menu is enabled, Exit press to exit the current menu and go back one level. a. Press the key to open the Brightness control. -
Page 22: Using The Shortcut Menu
Using the Shortcut Menu The following content is for general reference only. Actual product specifications may vary. The OSD (On Screen Display) can be used to adjust the settings of your LCD monitor. Press the key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. - Page 23 Hot key2 (default: Brightness) Open the Brightness control and select the brightness setting. When you are done, use go back one level.
- Page 24 Main Menu The Function page Open the Function page to select a menu function, and adjust the settings which you want using the arrows. You can also view your monitor’s system information from this page. When you are done, use to go back one level.
- Page 25 8. Low Blue Light: Filter out blue light to protect your eyes by adjusting how much low blue light is shown - Standard, Level1, Level2, Level3 or Level4. Note: • Higher values allow more blue light through. For the best protection select a lower value.
- Page 26 Color Performance Performance 1. Press the MENU key to open the OSD. 2. Using the button, select Color from the OSD. Then navigate to the setting you wish to adjust. 3. Use the button to select the setting. 4. Gamma mode allows you to adjust the luminance tone. The default value is 2.2 (standard value for Windows).
- Page 27 Audio Mode - Standard Picture Volume Mute Color Audio Performance System Information 1. Press the MENU key to open the OSD. 2. Using the button, select Audio from the OSD. Then navigate to the setting you wish to adjust. 3. Use the button to select the setting.
- Page 28 Note: 1. If AdaptiveSync is "On" , then the Over Drive selection is set to "Normal" automatically. 2. If AdaptiveSync is "OFF", then the user can set Over Drive to either one of the three settings including: (a) Extreme (b) Normal (c) Off. 3.
- Page 29 Note: 1. OSD Locked: Set the OSD Lock to "On" from the OSD and press "Enter". The "OSD Locked" message will appear in the middle of the screen, and LED lights will indicate as blinking blue. When pressing any key, "OSD Locked" message will be prompted. 2.
- Page 30 6. Auto Source: Automatically searches for available input sources. 7. Wide Mode: You can select which screen aspect you are using. The options are Aspect, 1:1, 21:9 and Full. 8. PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and PBP. You can also adjust the PIP Position, Sub Source, Source Swap, and Audio Source.
- Page 31 Save Setting to...(User mode only) Mode - U Picture Mode: sRGB Mode: Reading Color Mode: Darkroom Audio Performance System Information Save Settings to... 1. Press the MENU key to open the OSD. 2. Using the button, select “Save Setting to...” from the OSD. Then select the preferred mode.
- Page 32 TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. HDMI/DP Mode (Optional) Problems Current Status Remedy No Picture Blue Using OSD, adjust brightness and contrast to maximum or reset to their default settings.