1
.3 Plug the battery charger into an
electrical outlet.
CHARGE lamp starts flashing when
charging starts.
CHARGE lamp turns on when charging is
complete.
About 1 hour and 30 minutes are
required to charge a fully exhausted
battery.
1
.4 When charging is complete, remove the battery and then
disconnect the battery charger from the electrical outlet.
2
Attaching the Camera Strap
Step
3
Insert the Battery and the Memory Card
Step
3
.1 Open the battery-chamber/memory
card slot cover.
Attach the strap at two places.
First Steps
CHARGE
lamp
7