Nikon COOLPIX S30 Reference Manual page 175

Problem
Date and time of recording
are not correct.
Print date not available.
Date not imprinted on
images even when Print
date is enabled.
Screen for setting time and
date is displayed when
camera is turned on.
Camera settings reset.
Camera becomes hot.
Cause/Solution
• If camera clock has not been set, "Date not set"
indicator flashes during shooting and movie
recording. Images and movies saved before clock is
set are dated "00/00/0000 00:00" or "01.01.12 00:00"
respectively. The shooting date and time of still
images is not displayed during playback. Set the
correct time and date from the Date and time
option in the setup menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
Time and date has not been set.
The date cannot be imprinted on movies.
Clock battery is exhausted; all settings were restored
to their default values.
The camera may become hot when shooting movies
for an extended period of time, or when the camera is
used in a hot area; this is not a malfunction.
A
15, 80,
E42
15, 80,
E42
80, E43
15, 17
–
F11