Advertisement
ASSEMBLY INSTRUCTIONS
STEP 5
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
Open the lid and place the Pizza Stone Rack (5) into the oven. The round brackets on the rack should face
upwards.
•
Place the Pizza Stone (6) on top of the rack so that it is held in place by the round brackets of the rack. If
the round brackets do not capture the stone, check to see if the rack is upside down.
5
STEP 6
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
Attach the regulator with hose to the propane cylinder by turning the regulator handle clockwise
as shown below. If the unit is not in use, the gas must be turned "OFF" at the propane cylinder.
•
Check all gas supply fitting for leaks before each use. Do not use the oven until all connections
have been checked and do not leak (see "Leak Testing" instructions on page 11)
•
Place the oven on table as shown below. We recommend using this oven on a 32" high table.
8
32"
6
Advertisement
