ASSEMBLY INSTRUCTIONS
STEP 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
Remove screws from the lid handle (3) before assembling to the front door.
•
Flip the front door open and attach the lid handle to the front of the door by inserting 2 screws through the
back of the door as shown below.
3
STEP 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
Place the control knob (4) on to the valve stem as shown below. Push until the gap between the knob and
bezel is gone.
3
4
7