Table of Contents
Advertisement
The Sync Terminal
Optional Speedlights mounted on an SK-E900 flash bracket can be attached
via the camera's sync terminal. The following SB-series Speedlights (available
separately) can be used: 80DX, 30, 28DX, 28, 26, 25, 24, 22, and 22s.
Remove sync terminal cover and attach
flash bracket sync cord. Illusration at right
shows COOLPIX4500 with SK-E900 flash
bracket and optional Speedlight.
Using an Optional Speedlight
A ferrite core is provided with the COOLPIX4500. Before using an optional
Speedlight, be sure to attach this core to the sync cord adjacent to the camera
lead (see figure A, above at right). To prevent the sync cord from blocking the
viewfinder, connect it as shown above (B).
Notes on the Built-in Speedlight
In
and scene modes, or when Auto is selected for the Popup option in
the shooting menu for P, S, A, or M mode (
will pop up automatically. Do not prevent the built-in Speedlight from pop-
ping up by placing your fingers or other objects on top of the Speedlight.
When the built-in Speedlight is raised, keep your fingers and other objects
away from the flash window and photocell. If a shot seems dark even though
the flash fired, this may indicate that you accidentally blocked the flash win-
dow; check that the flash is unobstructed and try again.
66
1
2
114), the built-in Speedlight
Hide quick links:
Advertisement
Table of Contents
