Manual Focus - Nikon COOLPIX 4500 Manual

Manual Focus

In P, S, A, and M modes, manual focus can be used in place of autofocus for
situations in which you are unable to achieve the desired results using
autofocus.
1
Press the MF button and rotate the command dial until the manual focus
display appears in the monitor.
2
Using this display as your guide, continue to rotate the command dial until
your subject is in focus.
+
Unless Off is selected for Focus Options: Focus Confirmation (
focus confirmation will turn on automatically when manual focus is in ef-
fect, and objects that are in focus will be outlined sharply in the monitor.
Manual focus can be cancelled by pressing the MF button to select a new
focus mode.
Notes on Manual Focus
• When using the self-timer, be sure that the self-timer is selected (
before selecting a focus distance. Changing the focus mode after setting
the focus distance will cancel manual focus.
• Use autofocus (
In manual focus mode, the actual focus distance will differ from that shown
in the monitor.
• When manual focus is set to the
camera may be unable to focus at some zoom positions. If the camera is
unable to focus at the current zoom position, the manual focus display in
the monitor will turn red. Zoom the camera in or out until the manual focus
display no longer appears in red.
• If you adjust zoom after focusing, you will need to focus again at the new
zoom position.
59) when an optional converter lens is attached (
end of the manual focus indicator, the
Manual focus display
shows approximate
focus distance from
l e n s b e t w e e n
(2 cm/0.8˝ at middle
zoom position) and
infinity.
111),
106).
58)
61