Table of Contents
Advertisement
en Steam
The appliance adds clouds of steam to the cooking
compartment for approx. 3 to 5 minutes. Depending on
the operation, you can activate the steam jet several
times.
You can add the steam jet for the following functions:
¡ Types of heating → Page 14
– 4D hot air
– Top/bottom heating
– Circulated air grilling
¡ → "Meat probe", Page 20
Note: Only use the steam jet when cooking compart-
ment temperatures are above 120 °C.
11.3 Setting the type of steam heating
Note:
Observe the instructions for the types of steam heating:
¡ → "Types of steam heating", Page 17
Requirement: The water tank has been filled. If the wa-
ter tank runs dry during operation, a message appears
on the display. Operation is stopped.
→ "Filling the water tank", Page 16
Press "Steam" in the menu.
1.
Press the required type of steam heating.
2.
Press the temperature in °C.
3.
Use the setting ring to set the temperature.
4.
Press
on the display to confirm the set temperat-
5.
ure.
Press
"Cooking time".
6.
A cooking time must always be set for types of
steam heating.
To change the preset cooking time, press the relev-
7.
ant time value, e.g. hour display "h" or minute dis-
play "m".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
8.
If required, use
to reset the setting value.
To confirm the set cooking time, press
9.
play.
Press
to start the operation.
10.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
11.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Empty the water tank and dry the cooking compart-
12.
ment.
→ "After using steam operation", Page 19
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
Press
.
1.
Press
.
2.
Press the type of heating that you want to use.
3.
Reset the operation and use
4.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
18
on the dis-
to switch the ap-
to start.
Press
on the display.
1.
Press the temperature.
2.
Change the temperature with the setting ring.
3.
To confirm the change, press
4.
a The change is applied.
Changing the cooking time
You can change the cooking time at any time.
Press
on the display.
1.
2.
Press the cooking time
Use the setting ring to change the cooking time.
3.
To confirm the change, press
4.
a The change is applied.
11.4 Setting added steam
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 17
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. The appliance continues to operate but without
injecting steam into the cooking compartment.
→ "Filling the water tank", Page 16
Press the operating mode that you require in the
1.
menu.
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
Press
"Added steam".
3.
Use the setting ring to set the steam level.
4.
Steam level
1
2
3
5.
To confirm the set steam level, press
play.
Press
to start the operation.
6.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
When the food is ready, use
7.
ance off.
Empty the water tank and dry the cooking compart-
8.
ment.
→ "After using steam operation", Page 19
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
Press
on the display.
1.
Press added steam
2.
Change or deactivate added steam using the setting
3.
ring.
To confirm the change, press
4.
a The change is applied.
on the display.
.
on the display.
Added steam
Low
Medium
High
on the dis-
to switch the appli-
.
on the display.
Advertisement
Table of Contents
