16: Func Button (All Modes) - Nikon D80 Manual

16: FUNC Button (All Modes)

Choose the function performed by the FUNC. button.
Option Description
ISO display
The modifi ed value for ISO sensitivity is displayed while the FUNC. button is pressed.
(default)
Press the FUNC. button and rotate the main command dial to turn the grid display in
Framing grid
the viewfi nder on and off (
Press the FUNC. button and rotate the main command dial to select AF area mode
AF-area mode
(
Press the FUNC. button and rotate the main command dial to choose between nor-
Center AF area
mal and wide center AF areas (
If the built-in fl ash or an optional SB-800, SB-600, or SB-R200 fl ash unit is used, fl ash
FV lock
value locks when the FUNC. button is pressed (
Flash off Built-in fl ash and optional Speedlights turn off while the FUNC. button is pressed.
Matrix metering is activated while the FUNC. button is pressed (P, S, A, and M modes
Matrix metering
only).
Center-weighted metering is activated while the FUNC. button is pressed (P, S, A, and
Center-weighted
M modes only).
Spot metering is activated while the FUNC. button is pressed (P, S, A, and M modes
Spot metering
only).
FV Lock
This feature is used to lock fl ash output, preventing the fl ash level from changing between
shots or while recomposing photographs. Flash output is adjusted automatically for any
changes in ISO sensitivity or aper ture.
FV Lock
Both the FUNC. and the AE-L/AF-L button can be used for FV lock. FV lock using the FUNC. button is de-
scribed below; to use the AE-L/AF-L button, choose FV lock for Custom Setting 18 (AE-L/AF-L;
1
Select FV lock for Cus tom Setting 16 (FUNC button).
2
Raise the fl ash. In
tomatically as required when the shutter-release button is pressed
halfway. In P, S, A, and M modes, press the
fl ash.
92 Menu Guide / Custom Settings
87).
, , , and
89).
87).
modes, the fl ash will pop up au-
button to raise the
93). Press again to cancel FV lock.
94).