Using The Built-In Flash - Nikon D80 Manual

Hide thumbs Also See for D80:
Table of Contents

Advertisement

Using the Built-in Flash

The camera supports a variety of fl ash modes for photographing poorly lit or backlit sub-
jects.
Using the Built-in Flash:
1
Rotate the mode dial to select the desired mode.
2
Press the
panel (
41).
3
Take pictures. The fl ash will pop up as required when the shutter-release button is
pressed halfway, and fi re when a photograph is taken.
Using the Built-in Flash: P, S, A, and M Modes
1
Rotate the mode dial to select the desired mode.
2
Press the
3
Press the
panel (
41).
4
Select a metering method and set exposure.
5
Take pictures. The fl ash will fi re whenever a picture is taken.
Lowering the Built-in Flash
To save power when the fl ash is not in use, press it gently down-
ward until the latch clicks into place.
40
Reference: More on Photography (All Modes) / Using the Built-in Flash
,
,
, and
button and rotate until the desired fl ash mode is displayed in the control
button to raise the fl ash.
button and rotate until the desired fl ash mode is displayed in the control
Modes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents