Sb-800'S Available Flash Modes - Nikon SB-800 Instruction Manual

SB-800's available flash modes

The SB-800's available flash modes vary, depending on the cameras and
lenses in use or the camera's exposure mode. Using the TTL auto flash mode
is recommended for normal flash photography.
■■■
Available flash modes (Indicators, usable cameras)
TTL auto flash mode
• i-TTL mode:
• D-TTL mode:
• TTL (film based) mode: Do/D:
Non-TTL auto flash mode
• Auto Aperture flash:
• Non-TTL auto flash:
Manual mode
• Distance-priority
manual flash:
• Manual flash:
• Repeating flash:
u Monitor Preflashes
The SB-800 fires a series of imperceptible Monitor Preflashes just before the
flash fires to obtain information on the subject in these cases:
(1) when the SB-800 is used with cameras compatible with CLS, digital SLRs
not compatible with CLS, cameras in Group I with a CPU lens, and
COOLPIX cameras compatible with i-TTL, and flash mode is set to TTL
auto flash, and
(2) when the SB-800 is used with cameras compatible with CLS with a CPU
lens, and the flash mode is set to Auto Aperture flash.
Monitor Preflashes are fired instantaneously and cannot be differentiated from
the main flash, but H appears on the LCD panel (using a single flash unit).
However, for cameras in Group I, Monitor Preflashes are not fired when the
SB-800's flash head is adjusted to other than the horizontal/front or down to –7°
position, or the camera's flash sync mode is set to Rear-curtain sync, even
when H appears on the LCD panel.
36
Do/D:
Cameras compatible with CLS,
COOLPIX cameras compatible
with i-TTL
Do/D:
Digital SLRs not compatible with CLS
Cameras in Groups I to VI (No o
appears with cameras in Groups III
and IV while performing Balanced
Fill-Flash)
B (p. 38):
Cameras compatible with CLS,
Digital SLRs not compatible with
CLS, Cameras in Groups I to II
A (p. 40):
No limitation
p (p. 44):
Except D1
G (p. 46):
No limitation
q (p. 48):
No limitation
and D1 digital cameras.
X H