Page 1
Modern Tea Table T216 Installation Manual This manual is used for the installation of T216.080080. Please read it carefully before use and keep it properly.
Page 2
Assembly note: Use a protective mat and handle the product with care. Note: At least two people are required. Contact Sunon if you have any confusions.
Page 3
This picture shows all the accessories required, among which some are key accessories. If you have missed any, please contact Sunon. Tel:+86-400-8600-666 Exploded diagram: Name tabletop...
Page 4
Accessory list: cylinder-head cylinder-head cylinder-head M8x30 M8x60 M6x15 hex screw hex screw hex screw abnormal four-star steel tube tray 280*280*16 shape base Allen wrench Allen wrench...
Page 5
1. Install the steel tube and four-star base. abnormal shape...
Page 6
1. Install the tray. Note: when looking down, one of the screws and one foot of the four-star base should be in the same straight line.
Page 9
Acceptance note: Clean the surface. Acceptance note: Tidy up. Check and deliver.
Page 12
Suite 150, Building 525 Technology Drive, Irvine, CA.92618 sunonglobal.com 949-337-8838 info.us@isunon.com...
Page 13
Modern Tea Table T217 Installation Manual This manual is used for the installation of T217.080080. Please read this manual carefully before use and keep it properly.
Page 14
Assembly note: Use a protective mat and handle the product with care. Note: At least two people are required. Contact Sunon if you have any confusions.
Page 15
This picture shows all the accessories required, among which some are key accessories. If you have missed any, please contact Sunon. Tel:+86-400-8600-666 Exploded diagram: Name tabletop...
Page 16
Accessory list: cylinder-head cylinder-head cylinder-head M8x30 M8x60 M6x15 hex screw hex screw hex screw abnormal steel tube four-star base tray 280*280*16 shape Allen wrench Allen wrench...
Page 17
1. Install the steel tube and four-star base. abnormal shape...
Page 18
1. Install the tray. Note: when looking down, one of the screws and one foot of the four-star base should be in the same straight line.
Need help?
Do you have a question about the T216 and is the answer not in the manual?
Questions and answers