Unicol NEC W82 Manual

Wall Mount for NEC LCD8205
Flat . Tilting . Landscape . Portrait
Installation Instructions
INSPECT THE UNIT BEFORE INSTALLING
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
1. Carefully inspect mount for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue
the installation until the carrier has reveiwed the damage.
NOTE: Read all instructions before starting the installation.
2. Lay out components to ensure you have the required parts before proceeding (See Parts List below).
CAUTION: To prevent damage to the mount, study all instructions and illustrations before you begin the insatallation. Failure to
do so could render the Warranty for the mount and the equipment that attaches to it null and void. Pay particular attention to the
"Warnings" displayed in these instructions.
The structure to which the mount is anchored must be capable of supporting five times the total weight of the mount and all
attached equipment. We recommend installation by a Qualified AV Tradesperson, using masonry plugs or other reliable fixings to
ensure safe installation. Consult your builder or architect if in doubt.
If you have any questions regarding the installation, please contact UNICOL:
Europe: +49 (0) 9131 9405 800. info@unicol.de UK: +44 1865 767676 enquiries@unicol.com
(B) (B)
Parts List:
Qty 2 Wall Plates (A)
Qty 2 Screen Arms (B)
(A) (A)
Qty 2 Shoulder Bolts (C)
Qty 6 x M8 x 25mm screen fixing screws
(Screws to fix mount to wall are not included)
(C)
(C)
INSTALLING WALL PLATES (A)
NOTE: Both Landscape and Portrait versions are installed in the same manner.
WARNING: Improper installation can result in serious personal injury. Make sure that the structure can support a redundant
weight factor five times the total weight of the equipment: if not, reinforce the structure before installing the mounts.
1. Determine the exact mounting location on the wall prior to installation. Consider where the cables are routed from in relation
to the wall plates.
2. Screens can be mounted in Landscape or Portrait. Using the illustrations overleaf as a guide mark, drill and plug the wall
utilising all plate fixing holes. Ensure both Wall Plates are level and the plate marked with 'L' in on the left and plate marked 'R' is
on the right as viewed facing the wall.
Wall Plates are shown in relation to screen.