Picture Mode Function - Mdview 242-2 And 262-2 - NEC MDview 193 User Manual

PICTURE MODE function - MDview 242-2 and 262-2

Choose the Picture mode that is most suitable for the type of content that is shown.
There are five types of mode (STANDARD, sRGB, PROGRAMMABLE, Adobe
• To access the Picture mode, press Reset button while OSD menu is not showing.
• To select the mode, press the Left or Right button.
• To exit the PICTURE MODE, press the EXIT button.
NOTE: When selecting the Adobe
Press RIGHT
PROGRAMMABLE
Available PICTURE MODES
PICTURE MODE
STANDARD
SELECTABLE sRGB
®
Adobe
MEDICAL
2
PROGRAMMABLE*
This function allows you to adjust the "BRIGHTNESS", "AUTO LUMINANCE" and "UNIFORMITY" directly.
Select the menu with Up or Down button and adjust it with Left or Right button.
NOTE: When PROGRAMMABLE is selected, you cannot adjust the "BRIGHTNESS" and "AUTO LUMINANCE".
®
*Adobe RGB: Provides a standard color space used in high-end graphics applications including Digital Still Camera and imaging, provides
the highest level of color matching to other output devices.
*2: : Target white luminance and gamma correction is adjusted via NEC GammaCompMD calibration software (not adjustable via OSD).
®
RGB or MEDICAL mode, press the Select button on sRGB mode.
STANDARD
Press LEFT Press LEFT
Press
LEFT
Press
RIGHT
PURPOSE
Color setting based on
preference.
sRGB settings.
®
RGB Adobe RGB* settings.
MEDICAL settings.
Hardware Calibration settings
(BRIGHTNESS setting
is disabled.)
Press RIGHT
SELECTABLE
Press SELECT
COLOR CONTROL
Current setting which is selected
by Color control of OSD.
Set to 6500K for sRGB
(not adjustable)
Set to 6500K for Adobe
(not adjustable)
Set to NATIVE
(not adjustable)
Set to PROGRAMMABLE
(not adjustable)
English-30
®
RGB and MEDICAL).
Press
SELECT
GAMMA SELECTION
Current setting which is selected
by Gamma selection of OSD.
Set to GAMMA for sRGB
(not adjustable)
®
RGB Set to 2.2 for Adobe
(not adjustable)
Set to DICOM SIM.
(not adjustable)
Set to PROGRAMMABLE
(not adjustable)
Press SELECT
®
RGB