Backing Up Files Without Using Provided Software - JVC Everio R GZ-RX670 Detailed User Manual

Copying

Backing Up Files Without Using Provided Software

Copy the files to a computer using the following method.
This operation cannot be completed if the remaining battery power is not
0
enough. Charge the battery fully first.
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
Before connecting the cable, close the LCD monitor to turn off this
0
unit.
To USB
Connector
.
3
Open the LCD monitor.
.
This unit turns on and the "SELECT DEVICE" menu appears.
0
4
Tap "CONNECT TO PC".
SELECT DEVICE
SELECT DEVICE
TYPE TO CONNECT
CONNECT TO PC
.
5
Tap "PLAYBACK ON PC".
CONNECT TO PC
PLAYBACK ON PC
.
Disconnect the USB cable to return to the recording or playback
0
screen.
Close the Everio MediaBrowser 4 program, if it starts.
0
The following screen is displayed after the camera operation is
0
completed.
PLAYBACK ON PC
.
Operations are to be performed on the computer after the screen
0
switches.
114
To USB
Connector
Computer
6
(Windows 8)
Right-click "Computer" in the "Windows System Tool" menu to select
the checkbox, and then click the "JVCCAM_MEM" or "JVCCAM_SD"
icon.
(Windows 7)
Select "Computer" from the "Start" menu, then click on the
"JVCCAM_MEM" or "JVCCAM_SD" icon.
Open the folder with the desired files.
0
"List of Files and Folders" (A p. 115)
7
Copy the files to any folder in the computer (desktop, etc).
Caution :
When the camera and PC are connected by an USB cable, recorded
0
media are read-only.
Memo :
To edit/view the files, use a software that supports AVCHD (video)/JPEG
0
(still image) files.
The above operations on computer may vary with the system used.
0
Disconnecting this Unit from Computer
.
1
Click "Safely Remove Hardware and Eject Media".
2
Click all "JVCCAM~".
3
Disconnect the USB cable and close the LCD monitor.
Click