Connect To Video Camera (Dvt7110 Only) - Philips Voice Tracer DVT4110 User Manual

9 Connect to video
camera (DVT7110
only)
You can use your VoiceTracer as an external microphone
for a video or DSLR camera. This ensures the best audio
quality for your videos.
To connect your VoiceTracer to your video camera:
1
Screw the hot shoe adapter into the tripod thread on
the back of your VoiceTracer.
2
Slip the hot shoe adapter into your camera's hot
shoe. Make sure to direct the front of your VoiceTracer
in the direction you want to record.
3
Use both adjusting screws on the hot shoe adapter to
ensure that your VoiceTracer is fixated on your video
camera / DSLR camera.
16

Connect to video camera (DVT7110 only)

4
Insert the audio cable into the headphones jack on
the left side of your VoiceTracer.
5
Insert the other end of the audio cable into the
external microphone jack of your video camera.
6
In stop mode, press the Right function button
open the settings panel. Select Scene and press the
Record button, then select Video from the list and
confirm with the Record button.
X The Video scene main screen is displayed in red.
You can also see the current audio levels for both
channels on the bottom half of the screen.
7
Start recording the video on your video camera /
DSLR camera.
Note
• In the Video scene the VoiceTracer operates as an
external microphone, this means audio is not stored
on your VoiceTracer. The audio is recorded and stored
on your video camera / DSLR camera.
8
To exit the Video scene, press the Left function
button.
to