M?DRN Scandi Minimal Finna HYN-GD1SBC-WH Assembly Instructions Manual page 7

STEP-BY-STEP ASSEMBLY:
STEP 3:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
3
out. Refer to page 5 on how to use the cam lock system. Ensure all hardware pieces are
properly tightened. Make sure the bolts go through the pre-drilled holes properly. Do not over
tighten bolts.
STEP 4:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
4
out. Refer to page 5 on how to use the cam lock system. Ensure all hardware pieces are
properly tightened. Make sure the bolts go through the pre-drilled holes properly. Do not over
tighten bolts.
7/9