M?DRN Scandi Minimal Finna HYN-GD1SBC-WH Assembly Instructions Manual page 6

STEP-BY-STEP ASSEMBLY:
STEP 1:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
1
out. Insert H2 into panel F, H, J. Refer to page 5 on how to use the cam lock system. Ensure
all hardware pieces are properly tightened. Make sure the bolts go through the pre-drilled
holes properly. Do not over tighten bolts.
Anti-tip Restraint is REQUIRED in order to complete construction of this product.
When properly installed, this hardware can provide protection against the unexpected
STEP 2:
Insert H2 into panel B, A. Refer to page 5 on how to use the cam lock system.
2
Ensure all hardware pieces are properly tightened. Make sure the bolts go through the
pre-drilled holes properly. Do not over tighten bolts.
tipping of furniture.
6/9