Zio Ciro Subito Cotto 60 Instructions Manual
Hide thumbs
Also See for Subito Cotto 60:
- User manual (2 pages) ,
- User manual (3 pages) ,
- User manual (18 pages)
Advertisement
Quick Links
It is important that the oven "Subito Cotto" oven will be installed and used only in accordance with these
attached instructions.
We recommend you to read carefully the following instructions before using the oven,
make sure that you know how to operate to ensure that it functions properly.
The safety instructions, by themselves, do not eliminate danger completely, and
proper accident prevention measures must always be used.
SPECIFIC STABILITY INSTRUCTIONS
•
Make sure that the metal stand is well assembled (it is important to
assemble the stand following the instructions as showed in "Stand
assembly and oven positioning" section).
•
The oven is equipped with 4 handles, move the oven with the aid of 4
people or using a forklift. This duty should be performed by professionals
trained in this kind of works.
•
Improper handling of the oven and equipment could result in damaging
the oven or personal injury.
•
Position the oven above the stand as described in the section ("Stand assembly and oven
positioning").
The floor positioned above the stand (with the oven at the top) must have a resistance of at least 10
The floor positioned above the stand (with the oven at the top), must have a slope of less than 1%.
The metal stand supplied with the Subito Cotto oven is studied and designed specifically for these models, it
supports the weight of the oven. Without any other support base, it needed to be assembled to position
1. Pre-assemble the entire stand, taking care to mount all the supplied screws, without tightening them with
force.
2. Once the stand is positioned exactly in a vertical position, tighten the screws securely.
Once the stand is assembled you can position the oven (with 4 little legs in the base) above the assembled
Subito Cotto 60, 80 and 100 Model
Instructions - English
FLOOR OR SUPPORT BASE
STAND ASSEMBLY AND OVEN POSITIONING
correctly the oven.
ASSEMBLY FASE
The simple procedure is showed in the photos below:
metal stand, fitting the little legs in the legs of the stand.
kg/cm
2
.
Page 1
Advertisement
Related Manuals for Zio Ciro Subito Cotto 60
Summary of Contents for Zio Ciro Subito Cotto 60
- Page 1 Subito Cotto 60, 80 and 100 Model Instructions - English It is important that the oven “Subito Cotto” oven will be installed and used only in accordance with these attached instructions. We recommend you to read carefully the following instructions before using the oven, make sure that you know how to operate to ensure that it functions properly.
- Page 2 Subito Cotto 60, 80 and 100 Model Instructions - English BUMPS AND ACCIDENTAL PUSHES Avoid moving the oven, by hitting or pushing, but lifting it carefully using the handles. CURING AND FIRST FIRING FOR WOOD FIRED OVEN Curing is the process by which your oven is gradually and uniformly dried out of the humidity that might have been accumulated in the oven during the building and assembly stages.
-
Page 3: Important Warning
Subito Cotto 60, 80 and 100 Model Instructions - English For your continued enjoyment, please follow these simple Do`s and Don`t IMPORTANT-WARNING READ ALL INSTRUCTION CAREFULLY BEFORE INSTALLING AND USING YOUR SUBITO COTTO OVEN. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR EVEN DEATH •... -
Page 4: Oven Cooking
Subito Cotto 60, 80 and 100 Model Instructions - English • It's a good idea to clean the flu pipe every once in a while. Use a brush to loosen up any soot stuck inside the pipe or underneath the rain cap. - Page 5 Instructions - English GAS OVEN AND BURNER Subito Cotto 60/80/100 are standard configured to operate with GAS GPL. On request, before the purchasing, there is the possibility to configure the oven with Methane or Propane GAS. It is necessary to use a ½ Inches (12mm) flexible pipe length 1.5 meters (not supplied), and a pressure regulator for connecting the Subito Cotto’s to GPL cylinder.
- Page 6 Subito Cotto 60, 80 and 100 Model Instructions - English Combined version with GAS Burner Standard Wood Oven version TEK. REF. SRL Office and Factory: Z.I. Loc. Feurredda s.n. – 09088 SIMAXIS (OR) Tel. +39 0783 406005 – Fax +39 0783 406135 Web: www.zio-ciro.com...