It is important that the "NANO" oven is installed and used only
in accordance with the attached user manual, for your
security and to ensure that the oven will function properly.
We recommend you read carefully the following
instructions before using the oven.
The safety instructions, by themselves, do not eliminate
danger completely, and proper accident prevention
measures must always be used.
The NANO oven is designed to be used only outside. It is recommended where there is no wind,
even better in a good sheltered spot. The NANO oven is made of weather resistant
materials, but it is recommended to cover it after use ,when its fully cooled.
For longer periods, store in a cool dry place over winter.
• Position the oven on a proper stable surface, ensuring that the base can
support the ovens weight.
• Do not place the NANO oven on flammable/Combustible surfaces
The NANO oven is equipped with a stainless steel front shelf to improve the management of pizza
cooking and allowing the pizza to be turned even outside the oven. The front shelf is very easy to
assemble / disassemble, there is a small slot of a few millimeters on the front that allows the shelf
to be fixed into.
The NANO oven is configured to operate with LPG GAS. It cannot be used with Methane or
Natural GAS.
This model is not equipped with a piezoelectric, therefore, a classic long-barreled kitchen lighter
must be used for ignition.
It is necessary to use a low pressure regulator for connecting the NANO oven to LPG cylinder. The
regulator must have the below specifications:
• Gas Input: 1.5 kg/h
• LOW Pressure
regulator: 28/30 mbar
NANO
User Manual - English
SAFE POSITIONING OF YOUR NANO OVEN
ASSEMBLING THE FRONT STAINLESS STEEL SHELF
BURNER AND GAS CONNECTORS
BURNER TECHNICAL SPECIFICATIONS
Thermal Potential > MIN 2 KW – MAX 7 KW GAS
consumption > 0,47 Kg/h