Zio Ciro Subito Cotto 60 User Manual
Hide thumbs
Also See for Subito Cotto 60:
- User manual (2 pages) ,
- User manual (18 pages) ,
- Instructions manual (6 pages)
Advertisement
Quick Links
It is important that the oven "Subito Cotto" oven will be installed and used only in accordance with these
attached instructions.
We recommend you to read carefully the following instructions before using the oven,
make sure that you know how to operate to ensure that it functions properly.
The safety instructions, by themselves, do not eliminate danger completely, and
proper accident prevention measures must always be used.
SPECIFIC STABILITY INSTRUCTIONS
•
Make sure that the metal stand is well assembled (it is important to
assemble the stand following the instructions as showed in "Stand
assembly and oven positioning" section).
•
The oven is equipped with 4 handles, move the oven with the aid of 4
people or using a forklift. This duty should be performed by professionals
trained in this kind of works.
•
Improper handling of the oven and equipment could result in damaging
the oven or personal injury.
•
Position the oven above the stand as described in the section ("Stand assembly and oven
positioning").
The floor positioned above the stand (with the oven at the top) must have a resistance of at least 10
The floor positioned above the stand (with the oven at the top), must have a slope of less than 1%.
The metal stand supplied with the Subito Cotto oven is studied and designed specifically for these models, it
supports the weight of the oven. Without any other support base, it needed to be assembled to position
1. Pre-assemble the entire stand, taking care to mount all the supplied screws, without tightening them with
force.
2. Once the stand is positioned exactly in a vertical position, tighten the screws securely.
Once the stand is assembled you can position the oven (with 4 little legs in the base) above the assembled
Subito Cotto 60, 80 and 100 Model
User Manual - English
FLOOR OR SUPPORT BASE
STAND ASSEMBLY AND OVEN POSITIONING
correctly the oven.
ASSEMBLY FASE
The simple procedure is showed in the photos below:
metal stand, fitting the little legs in the legs of the stand.
kg/cm
2
.
Page 1
Advertisement
Related Manuals for Zio Ciro Subito Cotto 60
Summary of Contents for Zio Ciro Subito Cotto 60
- Page 1 Subito Cotto 60, 80 and 100 Model User Manual - English It is important that the oven “Subito Cotto” oven will be installed and used only in accordance with these attached instructions. We recommend you to read carefully the following instructions before using the oven, make sure that you know how to operate to ensure that it functions properly.
- Page 2 Subito Cotto 60, 80 and 100 Model User Manual - English BUMPS AND ACCIDENTAL PUSHES Avoid moving the oven, by hitting or pushing, but lifting it carefully using the handles. CURING AND FIRST FIRING FOR WOOD FIRED OVEN THIS PRE HEATING STEP IS VERY IMPORTANT! The first and initial fire allow humidity removal from the oven, the same has already been brought to a temperature up to 250°C - 480°F (in the highest point in the dome) for about an hour.
- Page 3 Subito Cotto 60, 80 and 100 Model User Manual - English TIPS AND PRECAUTIONS • Use kitchen gloves, oven or pot holders to grab the door while using the oven to prevent burns from contact with hot parts. • Care must be taken near the oven. All parts are very hot during use and remain so for hours after the fire has extinguished.