Table of Contents
Advertisement
14
INSTALLATION
9
With the aid of an assistant, slide the
unit into the cabinet. Reinstall the screws
removed from the cabinet sides in step 1.
CAUTION
● The unit is heavy. Use an assistant to help
lift the unit and set it in place. Lifting and
maneuvering the unit by yourself could
result in injury.
frame is lowered to meet the top surface of
the unit directly behind the upper guide. If
the unit falls from the window, it could cause
personal injury or property damage.
10
Cut the non-adhesive foam strip to the
proper length and insert it between the
upper window sash and the lower window
sash.
Foam Strip
(Non-adhesive)
11
Attach the window locking bracket with a
type C screw.
Window Locking Bracket
12
Cut the adhesive-backed heatproof foam
to match the size of the curtain panels.
Remove the backing from the heatproof
foam and attach it to the curtain panels.
Heatproof Foam
NOTE
● Heatproof foam improves the cooling
capability of the air conditioner.
13
Fold out the vent control lever located to
the left of the control panel, as shown.
14
Connect the wire harness from the front
grille assembly to the air conditioner.
15
Attach the front grille assembly to the
cabinet by inserting the grille tabs into the
slots on the front of the cabinet. Push the
grille in until it snaps into place.
NOTE
● Carefully guide the vent control lever
through the grille as you push the grille in.
16
Open the air inlet grille and secure the
front grille assembly with 1 type A screws
through the bottom of the front grille.
NOTE
● See the 'Electrical Data' section for information
on attaching the power cord to an electrical
outlet.
Advertisement
Table of Contents
