DeWalt DCH735N-XJ Original Instructions Manual page 30

EnGLIsh
HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER
DCH735, DCH775
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No-load speed
No-load beats per minute
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in
concrete
Bit holder
Chisel positions
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Drilling
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
28
WALT one of the
e
DCH735 DCH775
V 54
DC
1
min 177–355 145–290
-1
bpm 1350–2705 1105–2210
J 13.3
mm 25–38 28–42
mm 48
mm 40–125 40–150
SDS max® SDS max®
24
kg 8.5
dB(A) 97
dB(A) 108
dB(A) 3
= m/s² 9.0*
m/s² 1.5
= m/s² 8.8*
m/s² 1.5
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
54
1
Heavy-Duty Cordless SDS max® Combination
Hammer
19.4
DCH735, DCH775
D WALT declares that these products described under
52
e
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/53/EU and
2011/65/EU.For more information, please contact D
24
the following address or refer to the back of the manual.
9.4
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
96
107
3
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
10.1*
26.02.2021
a
1.5
WARNING: To reduce the risk of injury, read the
instruction manual.
9.4*
Definitions: Safety Guidelines
1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.
WALT at
e
WALT.
e