Related Manuals for Armorgard siteboss chest SB16
Summary of Contents for Armorgard siteboss chest SB16
- Page 1 siteboss chest Operational and maintenance manual Suitable for: SB16, SB24 1-877-794-2848 info@armorgardusa.com...
- Page 2 Welcome Welcome to your Armorgard SiteBoss Chest. The perfect combination of security and safety, whether you’re on the jobsite or in your truck. Please consult this manual for instructions on how to get the most from the unit. Please read this operational and maintenance manual carefully prior to setting up the SiteBoss Chest.
-
Page 3: Table Of Contents
Contents Safety information Product specification What’s included Tools you’ll need Getting to know your SiteBoss Chest Padlock housing dimensions How to use Installing the padlock Installing the rubber grommet Electrical safety information How to use the lock Optional extras Installing the casters Attaching the crane lifting eye kit Storing the unit Transporting the unit... -
Page 4: Safety Information
Safety information Before using a SiteBoss Chest, ensure any relevant risk assessments are carried out. Armorgard cannot be responsible for accidents that occur due to negligence. Ensure that the SiteBoss Chest is not damaged before using it. Always lock the box and the casters (if applicable) when not in use or out of sight. Do NOT leave keys inside the unit while locking. -
Page 5: Product Specification
While every effort has been made to ensure this operational and maintenance manual covers every aspect needed to operate your product safely, please take care when using the product and always operate with caution. Always liaise with management personnel on site for any additional operational restrictions that you need to be aware of. Don’t Lock the box when leaving it unattended Leave keys inside unit when locking... -
Page 6: What's Included
What’s included... 1x SiteBoss Chest 1x rubber grommet 1x UltraLock fixing kit (padlock not included) -
Page 7: Tools You'll Need
Tools you’ll need... Rubber mallet Adjustable or hammer (for wrench or ratchet adding rubber and socket grommet) (11/16” socket for installing padlock and 1/2” socket for casters) Multiple people may be required to assist with lifting... -
Page 8: Getting To Know Your Siteboss Chest
Getting to know your SiteBoss Chest The perfect combination of security and safety, whether you’re on the jobsite or in your truck Ergonomic easy-lift lid handle Anti-tamper feature for added Cable pass- security through point Data plate which Gas struts lists each unique product serial number... -
Page 9: Padlock Housing Dimensions
Padlock housing dimensions This lock system is designed to be used with a Master Lock No. 1, Master Lock No. 5, ABUS 41/50 or American Lock No. 50, or an equivalent sized lock. If you are using a padlock not listed above, it is your responsibility to make sure the lock mechanism is working correctly. -
Page 10: How To Use
How to use The SiteBoss Chest arrives fully You may require a forklift or assembled. pallet truck when unloading your SiteBoss Chest. Two or more people may be required to assist with lifting. It is important to check that the product is not damaged upon arrival and all parts are intact. -
Page 11: Installing The Padlock
Video: how to install the padlock Installing the padlock To fit the padlock, locate the cavity Inside the product, on the back of where it will be installed. the cavity, there will be a bolt with a nut. Remove this nut and the bolt to allow access for the padlock. Insert the shackle of the padlock Once the padlock is positioned, inside the cavity. -
Page 12: Installing The Rubber Grommet
Video: how to install the rubber grommet Installing the rubber grommet Locate the cut-out plate in the body Next, take the rubber grommet of the unit. With the help of a rubber and place it from the outside to fit mallet, carefully knock the cut-out the cut-out. Ensure it is properly plate from the inside. -
Page 13: Electrical Safety Information
Electrical safety information All electrical work MUST be performed properly with safety precautions. To prevent injury or damage to property, please ensure the below information is read carefully. Only use UL or CSA listed electrical devices that meet the requirements of the local jurisdiction. -
Page 14: How To Use The Lock
How to use the lock Once the padlock is installed, to un- To lock your product, you must close lock the box, you will need to insert the lid and simply push the padlock the key into the padlock. Twist it as in. -
Page 15: Optional Extras
Take your SiteBoss Chest to the next level with these optional extras Contact the Armorgard team to find out more about the optional extras for your product. Crane lifting eyes Casters To transport by crane To make your SiteBoss Chest... -
Page 16: Installing The Casters
Attaching the casters (optional extra) For the SiteBoss Chests that can Armorgard casters kits come with be installed with casters, lift the two swivel and two swivel-braked box on to a stable platform to casters. We recommend attaching... -
Page 17: Attaching The Crane Lifting Eye Kit
Video: how to attach the crane lifting eyes Attaching the crane lifting eye kit (optional extra) For the SiteBoss Chests that can be Thread the coach bolts through the attached with crane lifting eyes, use lifting eyes, then back through the a 13/32”... -
Page 18: Storing The Unit
Storing the unit The flat sides and recessed handles Ensure that the lock is secured when of the SiteBoss Chest can help save leaving the SiteBoss Chest unattended. space when storing the unit. This is essential to maintain the max- imum security of the box. Test this by trying to pull the lid up and open. -
Page 19: Transporting The Unit
Transporting the unit The design of the SiteBoss Chest makes transporting the product easy. The units come with forklift pockets for transporting using a forklift or pallet truck. Optional casters can be installed to these boxes using the pre-drilled holes. Please note that boxes may require more than one person to lift, and it is always advised to lift the boxes when they are empty of contents. -
Page 20: Equipment Care & Ongoing Maintenance
Equipment care The SiteBoss Chest is weather resistant and finished with a durable powder coating, so it is suitable for outdoor use, however, it does not mean it is waterproof. It is always important to note that any electrical components or equipment susceptible to water damage should be sealed, or removed in wet conditions. Always ensure that the product data plate remains visible and in good condition, especially the unique serial number. -
Page 21: Warranty
Warranty Armorgard products are built to last, and all have a manufacturer’s warranty of seven years - please refer to the terms and conditions for what this covers. Do not force entry into the product, as this could affect the warranty. Contact your padlock distributor if you require a replacement lock or key. - Page 22 1.4.1 Defect Arises Because the Buyer Failed to Follow the Seller’s Oral or Written Instruc- tions as to the Storage, Installation, Commissioning, Use or Maintenance of the Goods or (if There Are None) Good Trade Practice; 1.4.2 the Buyer Alters or Repairs the Goods Without the Written Consent of the Seller; 1.4.3 Defect Arises From Fair Wear and Tear (as Determined by the Seller in Its Sole and Absolute Discretion), Cosmetic Rust, Scratches, Dents, or Willful Damage, Negligence, Ab- normal Working Conditions or Misuse, Environmental or Other External Factors;...
-
Page 23: Spare Parts
Spare parts Gas struts SlamStop safety stay Other spare parts available. Please get in touch for more information. - Page 24 Find us on social media: UK Head Office Unit 14-16, Standard Way, Fareham Industrial Park, Fareham, Hampshire, PO16 8XB +44 (0) 23 9238 0280 | sales@armorgard.co.uk | www.armorgard.co.uk France Office Australia Office + 33 (0) 4 81 16 06 69 +61 (0) 1300 131 751 commercial@armorgard.fr...
Need help?
Do you have a question about the siteboss chest SB16 and is the answer not in the manual?
Questions and answers