Safety Information - Silvercrest 416066 2210 Operating Instructions Manual

Safety information

WARNING! RISK OF ELECTRIC SHOCK!
Connect the appliance only to a correctly installed power
►
socket supplying a mains power voltage of 220 – 240 V ∼,
at 50 Hz.
To avoid potential risks, if the appliance power cable is
►
damaged, it must be replaced by the manufacturer, its
customer service or by a qualified technician.
In event of operating malfunctions and before cleaning the
►
appliance, remove the power plug from the mains power
socket.
Always remove the power cable from the socket by pulling
►
on the plug, not on the power cable itself.
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over.
Do not expose the appliance to humidity and do not use it
►
outdoors. If any liquid gets into the housing, disconnect the
appliance from the mains power socket immediately and
have it repaired by a qualified technician.
Never hold the appliance, power cable or power plug with
►
wet hands.
If the power cable or the motor unit are damaged, you must
►
have the appliance repaired by qualified technicians before
using it again. Do not attempt to open the motor unit
housing. This can lead to risks and also invalidates the
warranty.
Disconnect the appliance from the mains power source
►
immediately after use. The appliance is completely free of
electrical power only when unplugged.
Never immerse the motor unit in liquid and do not
allow any liquids to enter the motor unit casing.
│ GB │ IE
■ 4 SMZ 260 J4