Electrolux EHG7822X Instruction Booklet page 24

24 electrolux
Ignition System / Gas Ignition Ignition System / Gas Ignition
Ignition System / Gas Ignition Ignition System / Gas Ignition Ignition System / Gas Ignition
Ignitor does not spark
N O N O
N O N O N O
Check plug top fuse and
replace if necessary
Check polarity and
earth continuity of
supply point
Check earth continuity
of appliance
Check continuity from 'N' on the
mains connector block and "O" on
the ignitor unit
Check continuity from 'L' on the
mains connector block and the
taps ignition switches
Check continuity from ignition
switches connector to ignitor unit
YES YES
YES YES YES
Check gas supply at
burner
Light burner manually
Check by pass simmer
adjusted
Check position of the
electrode
Check continuity from the tip of
each electrode to the terminals
1 to 4 on the ignitor unit
Check for breaks in the
insulation of the HT leads
Change the ignitor unit
Check fitting
of burners