Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EHG 7730
Summary of Contents for Electrolux EHG 7730
- Page 1 Gas hob - Gazovaà varoqnaà poverxnostì INSTRUCTION BOOKLET RUKOVODSTVO PO éKSPLUATACII Please read this instruction booklet before using the appliance Pohalujsta, proqtite dannoe rukovodstvo pered ispolìzovaniem pribora Mod. EHG 7730 35679-6301...
-
Page 2: Important Safety Information
Important Safety Information These warnings are provided in the interest of safety. You read them carefully before installing MUST or using the appliance. About Installation, Cleaning and Manteinance • It is mandatory that all operations required for the • Under no circumstances should you attempt to repair the appliance yourself. -
Page 3: Table Of Contents
Possibilities for insertion 73/23 - 90/683 (Low Voltage Directive); 89/336 (Electromagnetical Compatibility Directive); MANUFACTURER: 90/396 (Gas Appliances) ELECTROLUX HOME PRODUCTS ITALY S.p.A. 93/68 (General Directives) Viale Bologna 298 - 47100 FORLI’ (Italy) and subsequent modifications. Instruction for the User Hob Burners Control Knobs... -
Page 4: Maintenance And Cleaning
Maintenance and Cleaning Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. The pan supports are dishwasher proof. -
Page 5: Service And Original Spare Parts
Service and original spare parts This machine, before leaving the factory, has been Original spareparts, certified by tested and studied by many experts and specialists, in the product manufacturer and order to give you the best results. carrying this symbol are only available at our Service Centre Any repair work which needs to be carried out should and authorized spareparts... -
Page 6: Instruction For The Installer
Instruction for the Installer Gas Connection l The following instructions about installation and maintenance must be carried out by qualified Choose fixed connections or use a flexible pipe in personnel in compliance with the regulation in stainless steel. force. If using flexible metallic pipes, be careful they do not l The appliance must be electrically disconnected come in contact with mobile parts or they are not before all interventions. -
Page 7: Electrical Connection
Electrical connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label);... -
Page 8: Adaptation To Different Types Of Gas
Adaptation to different types of gas Injectors replacement Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the • injectors (Fig. 5), and replace them with the ones required for the type of gas in use (see Table 2). Reassemble the parts, following the same procedure •... -
Page 9: Building In
Building In Fig. 7 A = Auxiliary burner SR = Semi-rapid burner R = Rapid Burner UR = Triple crown burner These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. -
Page 10: Possibilities For Insertion
Possibilities for Fig. 12 Fig. 11 insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig.