General Recommendations; Product Specifications - Craftsman 580.76201 Owner's Manual

CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
REGULAR SERVfCE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean water inletscreen
on quick-connect.
Check high pressure hose.
Check detergent hose,
Check spray gun and assembly for leaks.
Purge pump of air and contaminants.
HOURLY OPERATING INTERVAL
Every 25 Every 100
Before Each Hours or Hours or
Use Yeady Yearly
xt
x
x
x
x
SERVICE DATES
ENGINE
Check oil level
Change engine oil.
Service air cleaner.
Clean/replace spark plug.
Prepare for storage.
x
x*
x**
x
Prepare unitfor storage if it is to
remain]drefor longerthan 30 days.
t Clean if clogged. Replace if perforated or tom.
• Change oil after first 2 hours then 25 thereafter. Change sooner when under dirty or dusty conditions.
" Clean more often under dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty of the high pressure washer does not cover
items that have been subjected to operator abuse or neg-
ligence. To receive full value from the warranty, operator
must maintain high pressure washer as instructed in this
manual.
Some adjustments will need to be made periodically to
properly maintain your high pressure washer.
All adjustments in the Service and Adjustments section of
this manual should be made at least once each season.
Once a year you should clean or replace the spark
plug and clean or replace the air filter and check the
gun and wand assembly for wear. A new spark plug
and clean air filter assure proper fuekair mixture and
help your engine run better and last longer.
PRODUCT SPECIFICATIONS
Pressure Washer Specifications
PRESSURE
FLOW RATE
.DETERGENT M X
WATER SUPPLY
TEMPERATURE
2000 psi
2.2 GPM
Use undiluted deterqent
Not to Exceed 140°F
Engine Specifications
ENGINE MODEL
RATED HORSEPOWER
DISPLACEMENT
SPARK PLUG: Type:
Set Gap to:
GASOLINE CAPACITY
OIL
SOLID STATE IGNITION
AIR GAP
HONDA
5.0
160cc
NGK: BPR6ES
or equivalent
0.028-0.031 in.
(0.70-0.80mm)
1.8 U.S. quart
SAE 10W-30 weiqht
0.0125 inch
In the State of California a spark arrestor is required by
law (Section 4442 of the Califomia Public Resources
Code). Other states may have similar laws. Federal laws
apply on federal lands.
Note: if you equip the engine of your pressure washer with a
spark arrestor muffler, the spark arrestor must be maintained in
effective working order by the owner/operator.
You can order a spark arrestor throughyour Sears Service
Center.
1!