Download Print this page

Table Of Contents - Panasonic MC-YL799 Operating Instructions Manual

Advertisement

TABLE OF CONTENTS /

• IMPORTANT SAFETY INSTRUCTIONS
FOR THE USER
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER
Before using the vacuum cleaner, please observe these basic precautions.
WARNING: To reduce the risk of fire, electric shock, or injury.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Do not use the appliance if the power cord or plug is damaged or faulty.
• This appliance is provided with a flexible cord and if this becomes damaged, it must be repaired by an Authorized Service Centre or a qualified person in order
to avoid any hazard.
• Unplug from the socket outlet when not in use and before cleaning the appliance or undertaking maintenance operations.
• Turn off the appliance before removing the plug. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Hold the plug, when rewinding the power cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not use wet filters after wash, make sure they are completely dry to avoid damaging the cleaner.
• Do not vacuum flammable or combustible substances, neither use in areas where they may be present.
• Do not vacuum hot ash, embers or large and sharp objects.
• Do not vacuum water or other liquids.
• Keep the vacuum cleaner away from heat sources such as radiators, fires, direct sunlight, etc.
• This vacuum cleaner is fitted with a thermal cut-out device which automatically turns off the cleaner to prevent overheating of the motor. When this happens,
disconnect the cleaner from the socket outlet and check the dust compartment and filters as they may be full or clogged with fine dust. Check for any other
obstructions in the hose or tube. After removing the obstruction, leave the cleaner to cool down until the thermal cut-out resets after approximately 60 minutes.
/
Page /
/
............................ 2-3
............................ 2-3
............................ 2-3
............................ 4-5
............................ 4-5
............................ 4-5
............................ 6-7
............................ 6-7
............................ 6-7
............................... 8
............................... 8
............................... 8
.
.
.
.
2
Page /
/
.......................... 9-10
.......................... 9-10
.......................... 9-10
......................... 11-12
......................... 11-12
......................... 11-12
.............................. 13
.............................. 13
.............................. 13
.............................. 14
.............................. 14
.............................. 14
:
:

Advertisement

loading