Preparation; Laundry Suitable For Drying In; Drying Machine; Laundry Not Suitable For Drying In Drying Machine - Beko BT3103IS User Manual

lamps used in this appliance should be res-
istant to inappropriate physical conditions
such as temperatures over 50 °C.

8 Preparation

Read the "Safety Instructions" first!

8.1 Laundry Suitable for Drying in

Drying Machine

Laundry that are not drying machine safe
may damage the appliance and the laundry
during drying. Follow the instructions on
the labels of the laundry to be dried. Only
dry the laundry with the "drying machine
safe" labels by choosing the suitable pro-
grams.
8.2 Laundry Not Suitable for Drying in
Drying Machine
• Undergarments with metal supports
should not be dried in drying machine. If
these metal supports get loose and
ripped from the garment, they may dam-
age the machine.
• Delicate embroidery textiles, woollen and
silk garments, garments manufactured
from delicate and valuable textiles, non
breathing garments and tulle curtains
should not be dried in drying machine.
• Pay attention to the drying symbols on
the label on the laundry. Dry laundry with
the label or symbol that says it is suitable
for drying in the dryer.

8.3 Preparing the Laundry to Be Dried

Items such as coins, metal parts, needles,
nails, screws, stones etc. may damage the
drum group of the product or may cause
functional operation issues. Therefore
check all laundry that will be loaded to the
product.
• Dry the laundry with metal accessories
such as zippers by turning them inside
out.
• Close the zippers, hooks and clasps, but-
ton up the covers' buttons, tie textile
belts and apron belts.

8.4 What to Do for Energy Saving

Use the highest possible spinning cycle as
you wash the laundry. Therefore you can re-
duce the drying period and reduce energy
consumption. Sort the laundry based on
their types and thickness. Dry same types
of laundry together. For instance thin kit-
chen towels and table cloths dry faster than
thick bathroom towels.
• Follow the recommendations in the
user's manual for program selection.
• During drying do not open the loading
door unless necessary. If you are re-
quired to open the loading door, do not
keep it open for too long.
• Do not add wet laundry as the drying ma-
chine operates.
• Clean the Fiber Filter before and after
each drying session.
• For models with condensation, be sure to
clean the condenser regularly at least
once a month or after 30 drying sessions.
• Make sure the filters are clean. Refer to
maintenance and cleaning section for de-
tails.
• For models with flue, follow the flue con-
nection rules specified in the guides and
clean the flue.
• During drying session, properly ventilate
the environment where the drying ma-
chine is located.
• In models with heat pump, check the con-
denser at least every six months and
clean it if it is dirty.
EN / 53
IT
EN