Beko BT3103IS User Manual page 43

• Install the product in a place
where periodic maintenance
and cleaning can be done with
ease.
• Place the product with its back
surface facing the wall. (For
models with heating).
• While placing the product, en-
sure that the back wall does
not come in contact with any
extrusion (a water tap, elec-
trical outlet etc.).
• Place the product with at least
1 cm space between the
product and the furniture
edges.
• Follow the flue connection
rules specified in the manual.
(For models with flue).
• The discharged air should not
be directed to a flue which is
used to discharge the smoke
of devices that use gas or
other fuels. (For models with
flue).
• The ventilation hose should
not be connected to a heating
stove or a chimney flue. (For
models with flue).
• Plug the product to a grounded
outlet protected with an appro-
priate fuse in align with the
specified type and current
rates. Have an expert electri-
cian set grounding equipment.
Do not use the product without
a grounding conforming with
regional/national regulations.
• Plug the product in a grounded
socket that conforms with the
voltage, current and frequency
values specified in the type la-
bel.
• Do not plug the product to
loose, broken, dirty, greasy
sockets or sockets that have
come out of their seats or
sockets with a risk of water
contact.
• The new hose sets supplied
with the product should be
used. Do not re-use the old
hose sets. Do not make attach-
ments to the hoses.
• Place the power cord and
hoses in such a way so as not
to cause a risk of tripping over.
• Make sure that the hose does
not slip or fold if you directly
drain the water from the laun-
dry that is generated by the
condensation of the moisture.
Otherwise, water leaking prob-
lem may occur.
• Do not wash the dryer with
hose.
• To use the product on top of a
washing machine, a fixing
aperture should be used
between two products. Have
the fixing aperture installed by
EN / 43
IT
EN