LG WASHTOWER FWT1310BG Owner's Manual page 65

Table of Contents

Advertisement

Dryer
Error Messages
Symptoms
/
dE1
dEz
DOOR ERROR
dE4
DOOR ERROR
/
tE1
tEz
TEMPERATURE ERROR
FI
TEMPERATURE ERROR
LE1
MOTOR LOCKED ERROR
/
LEz
AE
COMPRESSOR ERROR
OE
DRAIN PUMP ERROR
drN
DRAIN WATER FAILURE
ERROR
1F
NONE LINT FILTER
ERROR
Ps
POWER SUPPLY ERROR
The door has been opened while the appliance is in operation or the
appliance is being operated without the door being closed properly.
• Close the door completely.
• If
/
is not released, call for service.
dE1
dEz
Door switch detection is not working properly.
• Unplug the power plug and call for service.
Temperature Sensor has malfunctioned.
• Unplug the power plug and call for service.
The temperature inside the drum has risen suddenly.
• Unplug the power plug and call for service.
The motor has stopped suddenly.
• Check if the amount of clothes exceeds the maximum load capacity.
• Unplug the power plug and call for service.
The compressor has stopped suddenly.
• Unplug the power plug and call for service.
The drain pump motor has malfunctioned.
• Unplug the power plug and call for service.
The surrounding temperature for installation is below zero.
• The recommended surrounding temperature for installation is 5 - 35 ℃.
The drain hose is not connected properly.
• Connect the drain hose properly.
• Check if the drain hose is free of clogs or kinks and is not pinched behind
or under the dryer.
• If the message keeps appearing, unplug the power cord and call for
service.
The lint filter is not in the appliance.
• Insert the lint filter.
Power cord is connected incorrectly.
• Check the connection of the power cord.
• If the message keeps appearing, unplug the power cord and call for
service.
TROUBLESHOOTING
Possible Cause & Solution
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents