LG WASHTOWER FWT1310BG Owner's Manual page 56

MAINTENANCE
56
Wiping the Moisture Sensor
This device senses the moisture level of the clothes
during operation, which means it must be cleaned
regularly to remove any build-up of lime scale on
the surface of the sensor.
Wipe the sensors inside the drum.
CAUTION
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a dry
rough acrylic sponge.
Cleaning the Cool Air Inlet Grill
Vacuum the cool air inlet grill 3 - 4 times a year to
make sure there is no build up of lint or dirt that
may cause improper air flow. Always unplug the
appliance from the mains power before cleaning or
vacuuming.
NOTE
• Warm air is expelled through the ventilation grill.
• Adequate room ventilation should be provided
to avoid the contamination of air into the room
from units burning other fuels, such as open
fires.
Using Drum Clean Feature
With time and use, the appliance may form
unpleasant odours that leave your clothes smelling
after drying. Using this cleaning function
periodically helps to reduce the unpleasant odours
from the appliance.
CAUTION
• Remove all of the clothes from the appliance.
1
Turn on the appliance.
2
Press the Drum Care button.
3
Hold the Start/Pause button.
• This function operates for about 3 hours.
4
Open the dryer's door to provide the appliance
with enough air circulation for exhausting any
remaining odours.
WARNING
• For safety reasons, do not allow children or
animals to enter the appliance. It may cause
damage or injury.
Using Condenser Clean Feature
The appliance washes lint, which builds up onto the
surface of the condenser, automatically using
water that is condensed from the clothes during