1. Manuals
  2. Brands
  3. TransLite Manuals
  4. Modulator
  5. TL-9524C-4
  6. Manual

TransLite TL-9524C-4 Manual

4-channel encoder modulator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P a g e
| 1
PRODUCT MODEL NUMBER:
TL-9524C-4 4-CHANNEL
ENCODER MODULATOR
ABOUT THIS
MANUAL
DISCLAIMER
No part of this document may be reproduced in any form without the written permission of the copyright
owner.
The contents of this document are subject to revision without notice due to continued progress in
methodology, design and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or
damage of any kind resulting from the use of this document.
COPY WARNING
This document includes some confidential information. Its usage is limited to the owners of the
product that it is relevant to. It cannot be copied, modified, or translated in another language
without prior written authorization from TRANSLITE GLOBAL LLC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-9524C-4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TransLite TL-9524C-4

Summary of Contents for TransLite TL-9524C-4

  • Page 1 The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or damage of any kind resulting from the use of this document.

  • Page 2: Table Of Contents

    P a g e INDEX TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ......................3 1.1 PRODUCT OVERVIEW ...................... 3 1.2 KEY FEATURES ......................... 3 1.3 SPECIFICATIONS......................4 1.4 PRINCIPLE CHART ......................6 1.5 APPEARANCE AND DESCRIPTION .................. 7 CHAPTER 2 INSTALLATION GUIDE ......................

  • Page 3: Chapter 1 Introduction

    CHAPTER 1 INTRODUCTION PRODUCT OVERVIEW TL-9524C encoder modulator is Translite’s all-in-one device integrating MPEG2 encoding and modulating to convert audio/video signals into DVB-C/T/ATSC/ISDB-T/DTMB RF out. It supports 1/4/8 HDMI inputs, and its pay-as-you-grow modular design and flexible configuration are making it extremely scalable, and very reliable with high performance. The signals source could be from STB, satellite receiver, closed-circuit television cameras and antenna etc.

  • Page 4: Specifications

    P a g e SPECIFICATIONS HDMI Encoding Section Interface HDMI*4/8 Input Encoding MPEG2 Input Output 480@59.94/60i 480@30p 576@50i 576@25p 720@50/59.94/60p 720@25/30p Video 1080@50i 1080@25p 1080@59.94/60i 1080@30p 1080@50p 1080@25p 1080@59.94/60p 1080@30p Encoding MPEGI layer 2, MPEG-2AAC, AC3 Sample rate 48KHz Audio MPEGI layer 2 (128kbps) Bit rate MPEG-2 AAC (VBR)
  • Page 5 P a g e DVB-T Modulator Section Standard DVB-T COFDM Bandwidth 2M, 3M, 4M, 5M, 6M, 7M, 8M Constellation QPSK, 16QAM, 64QAM Code rate ½, 2/3, ¾, 5/6, 7/8 Guard Interval 1/32, 1/16, 1/8, ¼ Transmission Mode: 2K, 8K ≥35dB RF frequency 100-1000MHz, 1KHz step RF output level...

  • Page 6: Principle Chart

    P a g e DTMB Modulator Section RF frequency 100-1000MHz, 1KHz step RF output level -48 ~ -10dBm, 1dB step S-0.8-4QAM-595, S-0.8-16QAM-595, M-0.4-16QAM-945V,M-0.6-16QAM-945V, Transmission Mode M-0.6-64QAM-420V, M-0.6-64QAM-945V, M-0.8-16QAM-420V, M-0.8-16QAM-945V, M-0.8-64QAM-420V System Management Language English Upgrade Web update General Power supply AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz Dimensions 482*328*44.5mm...

  • Page 7: Appearance And Description

    P a g e APPEARANCE AND DESCRIPTION Front Panel Illustration 3 4 5 6...
  • Page 8 P a g e LCD screen Power Indicator Indicators Status Indicator CH1-CH4/8 indicates the 4/8 channels input UP/ DOWN, LEFT/RIGHT keys Enter key Menu key Lock key NMS (Network management port) Rear Panel Illustration RF output 8 HDMI input and 8 CC input ports Power Switch/Fuse/Power socket Grounding Pole...

  • Page 9: Chapter 2 Installation Guide

    P a g e CHAPTER 2 INSTALLATION GUIDE This section is to explain the cautions the users must know in some case that possibly injure may bring to users when it’s used or installed. For this reason, please read all details here and make in mind before installing or using the product.

  • Page 10: Environment Requirement

    P a g e | 10 ENVIRONMENT REQUIREMENT Item Requirement When user installs machine frame array in one machine hall, the distance Machine Hall between 2 rows of machine frames should be 1.2~1.5m and the distance Space against wall should be no less than 0.8m. Electric Isolation, Dust Free Machine Hall Volume resistivity of ground anti-static material: 1X107~1X1010，...

  • Page 11: Chapter 3 Operation

    P a g e | 11 ➢ Users should make sure the 2 ends of grounding wire well electric conducted and be antirust. ➢ It is prohibited to use any other device as part of grounding electric circuit ➢ The area of the conduction between grounding wire and device’s frame should be no less than 25mm CHAPTER 3 OPERATION...

  • Page 12: Lcd Menu Structure

    P a g e | 12 LCD MENU STRUCTURE An Overview of the LCD Menus (Please refer to the next page…)

  • Page 13: General Settings

    P a g e | 13 GENERAL SETTINGS By pressing LOCK key, users can enter in the main menu and set the parameters in the following editing interfaces, the LCD will display the following pages: ►1 Status 2 TS Config 3 Encode 4 Modulate 5 Network...
  • Page 14 P a g e | 14 The option with “►” is the current selection, users can press the ENTER key to enter the specified submenu to modify the parameters. 3.2.1 Status Under this menu, users can check input source status of each channel. The contents are the same for Channel 1-8, so here just takes one channel as the example.
  • Page 15 P a g e | 15 ➢ Channel 1/2/3/4/5/6/7/8 TL-9524C supports 8 Channels output with DVB-C, DVB-T, ATSC, DTMB or ISDB-T modulating. Users select different modulating modes for each channel under the menu of “3.2.4 Modulate”, the TS parameters will be different, LCD will display the following pages: Selecting modulation mode as DVB-C: DVB-C has 2 standards, selecting standard as J.83A, LCD will display the following pages: ►Network ID...
  • Page 16 P a g e | 16 ►Network ID Version Num Key ID Area Code TS Name Service ID Trans Type Info TS ID ON ID 3.2.3 Encode This device is equipped with maximum 8 HDMI channels input. Under this menu, users can enter the corresponding channels to set the relevant encoding input parameters.
  • Page 17 P a g e | 17 ►Video Bitrate Audio format: MPEG-1 Audio format Layer2; AC3; MPEG-2 AAC Latency CC Switch Program Number Users can’t set these parameters under ATSC and Program Provider DVB-C (J.83B) modulation modes. Program Name PMT PID Video PID Audio PID 3.2.4...
  • Page 18 P a g e | 18 DVB-C: ►Modulate Mode RF Enable Freq Level Symbol Rate Standard Constellation DVB-T: ► Modulate Mode RF Enable Freq Level Symbol Rate Bandwidth Constellation Guard Interval Code Rate...
  • Page 19 P a g e | 19 ATSC: ► Modulate Mode RF Enable Freq Level DTMB: ► Modulate Mode RF Enable Freq Level Mode ISDB-T: ► Modulate Mode RF Enable Freq Level Constellation Guard Interval Code Rate Time Interleaving...
  • Page 20 P a g e | 20 3.2.5 Network Setting After enter Network Setting, there are four submenus shows as the following LCD displays. IP Address 192.168.000.136 Subnet Mask 255.255.255.000 Gateway 192.168.000.001 MAC Address xx:xx:xx:xx:xx:xx 3.2.6 System setting ➢ Save Users can enter Saving Configuration submenu for saving settings. Choose yes and press ENTER to confirm.

  • Page 21: Web Nms Operation

    P a g e | 21 ➢ Factory Set Choose yes to restore the device into factory’s default configuration. Reset all sets? ►YES 3.2.7 Soft Version User can check the CPU, Board and Web version of this equipment under this submenu. CPU/Board/Web Version XX:XX:XX CHAPTER 4...

  • Page 22: Operation

    P a g e | 22 I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to 255 except 252 to avoid IP conflict). Use web browser to connect the device with PC by inputting the Encoder & Modulator’s IP address in the browser’s address bar and press Enter.
  • Page 23 P a g e | 23 channel support 1 DVB-C/T/ATSC/ISDB-T/DTMB output option, here we select DVB-C/DVB- T/ATSC/DTMB/ISDB-T modulation types for Channel 1-5 as an example. Under the modulation type of DVB-C Under the modulation type of DVB-T...
  • Page 24 P a g e | 24 Under the modulation type of ATSC Under the modulation type of DTMB...
  • Page 25 P a g e | 25 Under the modulation type of ISDB-T Figure-3 Parameters → Encode: Clicking “Encode”, it displays the information of the program from the 8 HDMI encoding channels as Figure-4. 8 encoding channels Audio encoding format: MPEG1 Layer2, Figure-4...
  • Page 26 P a g e | 26 Parameters → Modulate: Clicking “Modulate”, it displays the interface where users can configure the modulating parameters. Clicking “Setting Type→PART SET” to select modulation type and set frequency for each channel (Figure-5); Clicking “ALL SET” and select the “Modulation Type” and set frequency for all channels (Figure-6).
  • Page 27 P a g e | 27 Clicking “Channel1/2/3/4/5/6/7/8”, it displays the interface where users can configure the modulation parameters (Figure-7). Each channel supports 1 DVB-C/T/ATSC/ISDB-T/DTMB output option. Here we select DVB-C/DVB-T/ATSC/DTMB/ISDB-T modulation types for Channel 1-5 as an example. Channel 1: DVB-C modulating Channel 2: DVB-T modulating...
  • Page 28 P a g e | 28 Channel 3: ATSC modulating Channel 4: DTMB modulating Channel 5: ISDB-T modulating...
  • Page 29 P a g e | 29 Figure-6 System → Network: Clicking “Network”, it displays the interface as Figure-7 where to set network parameters. Figure-7 System → Password:...
  • Page 30 P a g e | 30 Clicking “Password”, it displays the screen as Figure-8 where to set login account and password for the web NMS. Figure-8 System → Firmware: Clicking “Firmware”, it displays the screen as Figure-9 where to update the firmware of this device.

  • Page 31: Chapter 5 Troubleshooting

    CHAPTER 5 TROUBLESHOOTING All TRANSLITE products have been passed the testing and inspection before shipping out from factory. The testing and inspection scheme already covers all the Optical, Electronic and Mechanical criteria which have been published by TRANSLITE. To prevent potential hazard, please strictly follow the operation conditions.

  • Page 32: Chapter 6 Packing List

    P a g e | 32 ➢ Frequently switching on/off device is prohibited; the interval between every switching on/off must greater than 10 seconds. Conditions need to unplug power cord ➢ Power cord or socket damaged. ➢ Any liquid flowed into device. ➢...
  • Page 33 P a g e | 33...

Table of Contents