Storage; Troubleshooting - Silvercrest 321850 1901 Operating Instructions Manual

5) To replace the rotary brush t, first push the
broad end onto the drive shaft so that the
rotary brush t hooks into place .
6) Then, push the other end into the mount so that
the rotary brush t sits straight in the floor
nozzle .
7) Replace the cover plate and fasten it firmly
into place by pushing the catch towards the
symbol (fig . 4) .
Fig . 4

Storage

■ When you are not using the appliance, place
it on the cradle g .
■ Place the accessories on the accessory
holders s/d:
–
Place the crevice tool i and the upholstery
nozzle o into the holders s/d .
–
Place the brush attachment u onto the
upper part of the crevice tool i .
■ Store the appliance in a dust-free and dry
location .
SHSS 16 A1

Troubleshooting

The appliance is not working .
■ The battery is not charged .
♦ Connect the appliance to the charger p .
■ The appliance is defective .
♦ Contact the Customer Service department .
The appliance is running but hardly
sucking up any dirt .
■ The battery is not sufficiently charged .
♦ Connect the appliance to the charger p .
■ The dirt container 8 is full .
♦ Empty the dirt container 8 .
■ The HEPA filter 6 is blocked .
♦ Clean the HEPA filter 6 .
The appliance will not charge .
■ The charger p is not correctly connected to
the socket/mains plug .
♦ Check the connections of the charger p .
■ The charger p is defective .
♦ Contact the Customer Service department .
GB │ IE │ NI │ CY │ 9 ■