Table of Contents
Advertisement
Allows users to set VID Step as 5mV or 10mV.
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
VCCIN AUX Voltage
Configure the voltage for the VCCIN AUX.
+1.8V PROC Voltage
Configure the CPU voltage (1.8V).
+1.05V PROC Voltage
Configure the CPU voltage (1.05V).
+0.82V PCH Voltage
Configure the chipset voltage (0.82V).
+1.05V PCH Voltage
Configure the chipset voltage (1.05V).
AVX Configuration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Configuration
Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
Extra Turbo Voltage
Specifies the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Offset Mode
Selects between Legacy and Selection modes. Need Reset System after enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global offset for the entire VF curve. In Selection modes, setting a selected VF point.
56
Advertisement
Table of Contents
