Mechanical Installation; Module Mounting; Site Consideration - LG N1T-G4 Series Installation Instructions Manual

Monocrystalline solar modules
Table of Contents

Advertisement

MECHANICAL INSTALLATION

MECHANICAL INSTALLATION

Module Mounting

The guarantee for solar modules from
LG Electronics is contingent upon mo-
dules being mounted in accordance with
the requirements described in this sec-
tion.
The solar modules are in Application
Class A and have the Safety Class II.
Therefore they can be operated in
systems with 120 V DC and higher.
General access is not restricted.
12

Site Consideration

Solar modules from LG Electronics
should be mounted in a location that
meets the following requirements.
Operating Temperature
Maximum Operating Temperature:
+90 °C
Minimum Operating Temperature:
-40 °C
Design Strength
Snow loads (Front side): 6.000 Pa
Wind loads (Rear side): 5.400 Pa
Operating Environments
The solar modules from LG Electronics
can be operated in a location where they
could come in contact with salt water or
ammonia, if they have been tested suc-
cessfully for these operating conditions.
Please see related certificates. Please
get from LG Electronics an approval for
increased conditions.

Advertisement

Table of Contents
loading

Table of Contents