Table of Contents
Advertisement
Cleaning
1. Turn off the projector and unplug the power cable
before cleaning the cabinet or replacing the laser.
2. During cleaning, turn off the projector, and disconnect
the power plug from the outlet.
3. Clean the cabinet periodically with a cloth. If heavily
soiled, use a mild detergent. Never use strong deter-
gents or solvents such as alcohol or thinner.
4. Use a blower or lens paper to clean the lens, and be
careful not to scratch or mar the lens.
5. Do not touch the projector or the power plug with wet
hand. Doing so can cause electrical shock or fire.
CAUTION
1. Do not unplug the power cable from the wall outlet
or projector when the projector is powered on.
Doing so can damage the projector.
• While projecting images
• While cooling after the projector has been turned
off.
(The POWER button LED blinks in green while the
fan is rotating, and "cooling..." is displayed on the
LCD screen.)
2. Do not turn of the AC power for 90 seconds after the
laser is turned on and while the POWER indicator is
blinking green. Doing so could cause premature
laser failure.
3. Use of a wall outlet with a 20 A or more circuit
breaker is recommended.
4. Keep hands away from the lens mounting portion
while the lens shift is in operation. Failure to do so
could result in fingers being pinched between the
cabinet and lens cover.
Caution on Carrying the Projector/Handling the
Optional Lens
The projector should always be carried by at least 4 peo-
ple, holding the handles on the bottom. Remove the lens
unit from the projector body when moving the projector.
When installing / removing a lens, shut down the AC power
to the projector.
When shipping the projector with the lens, remove the lens
before shipping the projector. Always attach the dust cap
to the lens whenever it is not mounted on the projector. The
lens and the lens shift mechanism may encounter damage
caused by improper handling during transportation.
Light Module
1. A light module containing multiple laser diodes is
included in the product as the light source.
2. These laser diodes are sealed in the light module. No
maintenance or service is required for the performance
of the light module.
3. End user is not allowed to replace the light module.
4. Contact qualified distributor for light module replace-
ment and further information.
Cable information
Use shielded cables or cables attached ferrite cores so as
not to interfere with radio and television reception.
For details, please refer to "2. Installation and Connection"
in this user's manual.
Installing the Projector
This projector is an RG3 product. The projector is for
profes sional use and must be installed in location where
safety is assured. For this reason, be sure to consult your
dealer as installation and attachment/detachment of the
lens unit must be performed by a professional service per-
sonnel. Never try to install the projector by yourself. This
may result in visual impairment etc.
Connecting the power cord to earth
This equipment is designed to be used in the condition of
the power cord connected to earth. If the power cord is not
connected to the earth, it may cause electric shock. Please
make sure the power cord is connected to the wall outlet
directly and earthed properly.
Do not use a 2-core plug converter adapter.
Handling the power cord
• When connecting the power cord to the projector's AC
IN terminal, make sure the connector is fully and firmly
inserted. Be sure to fix the power cord using the power
cord stopper. Loose connection of the power cord could
lead to fire or electric shock.
• Do not connect or disconnect the power cord with wet
hands. Doing so could result in electric shock.
Lens shift, focus and zoom operations
• When shifting the lens or adjusting the focus or zoom,
do so from either behind or to the side of the projector.
If adjustments are performed from the front, your eyes
could be exposed to strong light and get injured.
• Keep your hands away from the lens area when perform-
ing the lens shift operation. If not, your fingers could get
caught in the gap between the cabinet and the lens.
(For Customers in U.K.)
IMPORTANT
• The wires in this mains lead are coloured in accor-
dance with the following code:
GREEN-AND-YELLOW:
BLUE:
BROWN:
• As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug pro-
ceed as follows:
• The wire which is coloured GREEN-AND-YELLOW
must be connected to the terminal in the plug which
is marked by the letter E or by the safety earth symbol
or coloured green or green-and-yellow.
• The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured black.
• The wire which is coloured BROWN must be con-
nected to the terminal which is marked with the letter
L or coloured red.
• Ensure that your equipment is connected correctly. If
you are in any doubt consult a qualified electrician.
"WARNING: THIS APPARATUS MUST BE EARTHED."
Important Information
"Earth"
"Neutral"
"Live"
5
Advertisement
Table of Contents
