Table of Contents
Advertisement
Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80
devices. For example, more devices might connect to the IoT WiFi network than to the
employee network, but the typical bandwidth usage for IoT devices might be lower
than for employee devices.
Note: The router does not control the uplink bandwidth, that is, the bandwidth from
devices to the router.
To set the download bandwidth ratios for the SSIDs:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays the admin WiFi settings.
Note: Even though this is the page for the admin WiFi settings, the bandwidth ratios
that you specify on this page apply to the admin WiFi network, employee WiFi
network, IoT WiFi network, and guest WiFi network. (All bandwidth ratios together
must add up to 100 percent.) Similarly, if you specify bandwidth ratios on the
employee WiFi settings page, IoT WiFi settings page, or the guest WiFi network
page, they also apply to all other WiFi networks.
5. Select the Enable Bandwidth per SSID check box.
In the Bandwidth per SSID graphic, the colored icons are enabled.
6. Specify the bandwidth ratios by moving the icons on the bandwidth line.
The icons represent the following WiFi networks:
• Blue. Admin WiFi network (Wireless 1).
• Green. Employee WiFi network (Wireless 2).
• Purple. IoT WiFi network (Wireless 3).
• Gray. Guest WiFi network.
As you move an icon, the bandwidth ratio for the WiFi network changes and the
percentage displays in the icon.
Specify Network Settings
105
User Manual
Advertisement
Table of Contents
