Installing The Power-Adapter Port; Speakers; Removing The Speakers - Dell Latitude 3340 G94C5 Service Manual

Installing the power-adapter port

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the installation
procedure.
Steps
1. Align and place the power-adapter port on the system board.
2. Connect the power-adapter port cable to the connector on the system board.
3. Gently press the right display hinge in downward direction towards the system.
4. Align the screw holes on the right display hinge with the screw holes on the system.
5. Replace the two screws (M2.5x4) to secure the right display hinge to the system.
Next steps
1. Install the base cover.
2. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the wireless card.
44 Removing and installing components
After working inside your
Before working inside your
computer.
computer.