Removal steps of the LCD bezel assembly
Step
Screw cap
1
When installing: Ensure that all the latches are attached firmly.
2020 LCD panel and LCD cable
For access, remove these FRUs in order:
•
"1010 Bottom cover" on page 56
•
"1020 Battery" on page 57
•
"1030 M.2 solid-state drive" on page 59
•
"1040 Wireless LAN card" on page 60
•
"1050 Memory module" on page 60
•
"1060 Coin-cell battery" on page 61
•
"1070 Keyboard" on page 61
• "1080 Keyboard bezel assembly and media-card-reader board" on page 63
• "1090 System board assembly, dc-in connector, and thermal fan" on page 66
Screw (quantity)
M2 × L3 mm, flat-head, nylon-coated (2)
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
73