Electrolux AEG SANTO SK 48840-7I Operating Instructions Manual page 42

Table of Contents

Advertisement

Available languages

Available languages

9. Remove the squares and mark a
distance of 8 mm from the outer
edge of the door where the nail
must be fitted (K).
10. Place the small square on the
guide again and fix it with the
screws supplied.
Should the alignment of the
furniture door be necessary, use the
clearance of slots.
At the end of this procedure, it is
necessary to check if the door of the
furniture closes properly.
11. Fix cover (Hd) on the small square
(Hb) until it clips into place.
42

Advertisement

Table of Contents
loading

Table of Contents