NewAir NIF20CBK00 Owner's Manual page 8

FLOOR STAND ASSEMBLY:
1. Remove the 4 screws from the base tube (fig. 1 & 2)
2. Align the screw hole on the side of the metal plate and the hole on the base
tube, then insert the screw and nut to tighten. Do the same thing on the
other side of the metal plate. (fig. 3, 4 & 5)
3. Align the screw holes in the middle of the metal plate with the holes in the
fan bracket, then insert the screws and nuts to tighten (fig. 6, 7 & 8)
8
newair.com