Advertisement
This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from the
outlet. Replace the fuse as per the user servicing instructions (follow product
marking for proper fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product should be discarded or
returned to an authorized service facility for examination and/or repair.
Fuse Replacement:
Grasp plug and remove from the receptacle or other outlet device. Do not
1.
unplug by pulling on cord.
Open fuse cover by sliding open fuse access cover on top of attachment plug
2.
towards blades. See Fig. 2.
Remove fuse carefully. Use a small tool to pry the end of the fuse from
3.
holder cavity. Be careful not to break glass window.
Replace fuse. WARNING: Risk of fire. Replace fuse only with identical 2.5 or
4.
5.0 Amp, 125 Volt fuse (3.6mm x 10mm). Be sure fuse is properly seated
within its cavity.
Close fuse cover by sliding it back to its original closed position.
5.
Fig 1
11
Fig 2
Slide Cover to Open
newair.com
Fig 3
Advertisement
