GRAVITY LTST 01 Manual

LTST 01
LAPTOP STAND WITH ADJUSTABLE HOLDING PINS
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Gravity is a registered brand of the Adam Hall Group
®
FEATURES
• Compact and lightweight laptop stand
• Tray with adjustable holding pins
• Suitable for laptops, tablets, smaller mixers and effects
• Tray can be tilted by 180 degrees
DESCRIPTION
No matter if you're working on stage, at home, in the studio or on location at
a photo shoot, now your laptop can stay firmly fixed in place and stable at
all times in your mobile performance rigs –positioned just the way you want
– all thanks to the Gravity® LTST 01 laptop stand.
The large mounting plate can accommodate all standard laptop sizes ranging
from 12" to 17". Your laptop is carefully and securely attached to the stand
thanks to 14 slots in the top section, 2 slots in the bottom section, and the
freely adjustable holding pins and clamps that come supplied with the
product. The holding pins are pressed onto the laptop and then locked into
place from below using the set screws.
You can also use the stand for your DJ controller, mixer or other pieces of
equipment that you always need within arm's reach. The mounting plate
can be tilted continuously by 180°, meaning it can be used both in vertical
and horizontal applications. It can also be easily twisted off for use in the
field.
Its solid aluminium tripod with a 35 mm socket has been designed for maximum
mobility because it weighs only 1.94 kilograms. The stand's height can be
gradually adjusted from 750 mm to 1.320 mm, allowing you to adjust it
perfectly to your needs – whether you're standing or sitting.
With the LTST 01 laptop stand, Gravity® offers you a flexible companion for
your mobile performance rigs.
SPECIFICATIONS
Product type
Product type
Type
Steel
Tubing material
Tubing surface
Color
Width adjusting jaws
Width spacing between adjusting pins
min.
Width spacing between adjusting pins
max.
Height spacing between adjusting pins to
adjusting jaws min.
Height spacing between adjusting pins to
adjusting jaws max.
Width spacing between adjusting jaws
min.
Width spacing between adjusting jaws
max.
Tray width
Tray height
Min height
Max height
Transport length
Height adjustment
Base type
Base material
Tubing diameter
Max. load
Interchangeable rings
Black ring pack included
Weight
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
GLTST01
Stands and Tripods Multimedia Equipment
Laptop Stand
Steel
Aluminum
Powder coated
Black
40 mm
120 mm
425 mm
117 mm
250 mm
130 mm
360 mm
480 mm
330 mm
750 mm
1320 mm
665 mm
Adjusting screw with safety pin
Leg joint
Die-cast aluminum
35 mm
35 kg
2x 30 mm
Yes
4.02 kg
Phone: +49 60 81 · 94 19-0
adamhall.com